Home Products 喷气织机




1--Main drive: Super start motor,3.7KW,with Pulley for 3 kinds speed,Option:Independent frequency control

weft insertion main nozzle + sub nozzle + accessorial nozzle,can get high yarn speed in low air pressure..The nozzle jet time can be separatedly setup according to the single weft,which increase the control accuracy of Weft insertion,and enlarge the loom application Scope. The support of ultra short air channel and assistant nozzle saves about 10% consumption of air.

2--Beating up : Bilateral 4-bar linkage beating up. 6-bar linkage beating up for loom width280cm.

3--Shedding Electronic dobby shedding with 16 pcs heald frames at most.Option: cam shedding or Crank.

4--Let off   Servo Electronic let off,0.75KW.Positive loose warp device is help to keep steady yarn tension.

5--take up  Servo Electronic take up,0.75KW.Density-change weaving

6--color selecting 1/2/4/6

7--Heald frame link  Positive Shedding,Lower of Top type heald frame

8--control system  Adopting 32 bit microcomputer control. Loom auto stop when weft breakage ,warp breakgae,empty weft,multi weft and positioning stop. Automatically detect and display error. Group control management, remote control, on-line diagnosis.

9--lubricating & Cooling  Oil bath in main drive parts,other parts lubricated by electric pump at fix time.

10--Reed width 150cm190cm210 cm230 cm280cm

11--Speed Design Top speed:1000RPM  Optimal Speed: 550-650RPM

12--weft density 25350 Pick/inch

13--weft Insertion rate   Max. 1900m/min

14--Dia.of warp beam  ф800  &  ф1000

15--Dia.of cloth rolling  Innerф600Outerф1200

16--Suitable weaving range  cotton(weft):5s-100s, Polyester:20D-1000D